OTTO Seal S110, Premium Neutral Silicone 310ml (Different Colours Available), Transparent

CHF11.80

Kategorie: Schlagwort:

Beschreibung

Price: €11.80
(as of Mar 08,2022 19:12:33 UTC – Details)



Eigenschaften: -Neutral vernetzender 1K-Silicon-Dichtstoff -Sehr gute Witterungs-, Alterungs- und UV-Beständigkeit -Ausgezeichnete Frühbeanspruchbarkeit -Hoch abriebfest und schlierenfrei -Anstrichverträglich nach DIN 52452 (nicht überstreichbar) -Klebfreie Oberfläche -Sehr gute Haftung auf vielen Untergründen, z. T. in Verbindung mit Primer -Nicht korrosiv -Fungizid ausgerüstet -Verträglich mit PVB-Folien entsprechend den Kriterien der ift-Richtlinie DI-02/1 -Dehnspannungswert bei 100 % (DIN 53504, S3A): 0, 4 N/mm². Anwendungsgebiete: -Glasfalzversiegelung an Holzfenstern -Abdichten von Anschlussfugen an Fenstern und Türen aus Holz, Metall und Kunststoff -Abdichten von Profilglas (z. B. Profilitverglasung) -Dehnungs- und Anschlussfugen an Beton- und Porenbetonfertigteilen -Abdichten von Fugen an Fassaden, Metallbaukonstruktionen -Geeignet für die Verfugung an Glaselementen -Dehnungs- und Anschlussfugen im Sanitärbereich. Normen und Prüfungen: -Geprüft nach EN 15651 – Teil 1: F EXT-INT CC 25 LM -Geprüft nach EN 15651 – Teil 2: G CC 25 LM -Geprüft nach EN 15651 – Teil 3: XS 1 -Geprüft nach EN 15651 – Teil 4: PW INT 12, 5 E -Geprüft nach DIN 18545, Beanspruchungsgruppe E (Institut für Fenstertechnik, Rosenheim) -Entspricht den Anforderungen der DIN 18540-F -Entspricht den Anforderungen der ISO 11600 G 25 LM -Geprüft nach FCBA (CTBA) L 114 (Eignung von Dichtstoffen zur Glasfalzversiegelung an Holzfenstern) -„Besonders empfehlenswertes schadstoffarmes Bauprodukt“ gemäß Baustoffliste (TOXPROOF) des TÜV Rheinland -Unbedenklichkeitserklärung in Bezug auf Kontakt mit Lebensmitteln.
Neutral Vernetzender joint sealant 1 K
Contents: 310ml
Brand quality
Highly abrasion-resistant and streak-free

Bewertungen

Es gibt noch keine Bewertungen.

Schreiben Sie die erste Bewertung für «OTTO Seal S110, Premium Neutral Silicone 310ml (Different Colours Available), Transparent»

Ihre E-Mail-Adresse wird nicht veröffentlicht. Erforderliche Felder sind mit * markiert

Quick Comparison

SettingsOTTO Seal S110, Premium Neutral Silicone 310ml (Different Colours Available), Transparent remove3-Way Switching Valve 1/2 Inch, Shower G 1/2 Inch, Diverter Valve Switch Solid Brass Shower Three-Way Valves Adapter Diverter Valve Shower System Replacement Part, Chrome Polished removePack of 2 Tap Aerator, Tap Extension, Flexible Water Saving, 360° Swivel Stainless Steel Tap with Hose Extension, for Kitchen and Bathroom removesourcing map Kitchen Bathroom Tap Accessories Universal Hot Cold Single Lever Handle Set with Screw DE removePattex Silicone, transparent removeSANTRAS® Gasket Set with 100 Flat Gaskets in Seven Types (3/8 Inch to 1 ½ Inch) - Very Sturdy Sealing Box with Centellen® WS 3820 for Solar, Gas, Water, Heating and Garden remove
Image
SKU
Rating
PriceCHF11.80CHF13.99CHF10.99CHF12.49CHF8.99CHF24.99
Stock
Availability
Add to cart

Buy Now

Buy Now

Buy Now

Buy Now

Buy Now

Buy Now

Description
Content Price: €11.80
(as of Mar 08,2022 19:12:33 UTC - Details)

Eigenschaften: -Neutral vernetzender 1K-Silicon-Dichtstoff -Sehr gute Witterungs-, Alterungs- und UV-Beständigkeit -Ausgezeichnete Frühbeanspruchbarkeit -Hoch abriebfest und schlierenfrei -Anstrichverträglich nach DIN 52452 (nicht überstreichbar) -Klebfreie Oberfläche -Sehr gute Haftung auf vielen Untergründen, z. T. in Verbindung mit Primer -Nicht korrosiv -Fungizid ausgerüstet -Verträglich mit PVB-Folien entsprechend den Kriterien der ift-Richtlinie DI-02/1 -Dehnspannungswert bei 100 % (DIN 53504, S3A): 0, 4 N/mm². Anwendungsgebiete: -Glasfalzversiegelung an Holzfenstern -Abdichten von Anschlussfugen an Fenstern und Türen aus Holz, Metall und Kunststoff -Abdichten von Profilglas (z. B. Profilitverglasung) -Dehnungs- und Anschlussfugen an Beton- und Porenbetonfertigteilen -Abdichten von Fugen an Fassaden, Metallbaukonstruktionen -Geeignet für die Verfugung an Glaselementen -Dehnungs- und Anschlussfugen im Sanitärbereich. Normen und Prüfungen: -Geprüft nach EN 15651 - Teil 1: F EXT-INT CC 25 LM -Geprüft nach EN 15651 - Teil 2: G CC 25 LM -Geprüft nach EN 15651 - Teil 3: XS 1 -Geprüft nach EN 15651 - Teil 4: PW INT 12, 5 E -Geprüft nach DIN 18545, Beanspruchungsgruppe E (Institut für Fenstertechnik, Rosenheim) -Entspricht den Anforderungen der DIN 18540-F -Entspricht den Anforderungen der ISO 11600 G 25 LM -Geprüft nach FCBA (CTBA) L 114 (Eignung von Dichtstoffen zur Glasfalzversiegelung an Holzfenstern) -„Besonders empfehlenswertes schadstoffarmes Bauprodukt“ gemäß Baustoffliste (TOXPROOF) des TÜV Rheinland -Unbedenklichkeitserklärung in Bezug auf Kontakt mit Lebensmitteln.
Neutral Vernetzender joint sealant 1 K
Contents: 310ml
Brand quality
Highly abrasion-resistant and streak-free
Price: €11.80
(as of Mar 08,2022 19:12:33 UTC - Details)

3 Way Switching Valve Shower 1/2 Inch
3-Way Shower Diverter - This shower arm diverter is a 3-way valve that attaches to the shower arm, conveniently converts water from a hand shower and fixed shower head. Can control the draining of water from both outlets at the same time, but the water flow is halved at each outlet and depends on your water pressure.
Anti-leak design: rubber seals included for a better tight seal to fit well with your faucets without leakage when installed correctly.
High-quality materials: the valve body is made of high quality solid metal brass with excellent properties against rust and dirt. One-piece brass body with solid metal handle. High quality metal material is durable and long lasting. Designed with a large water channel without water restrictions.
Modern design: reversible valve with flashing chrome plating, the installation style fits into any kitchen or bathroom. Fits most shower arms or bathroom accessories, hand showers, shower filters, hand hoses.
Price: €11.80
(as of Mar 08,2022 19:12:33 UTC - Details)

Product description: 1. The stainless steel rotating kitchen tap is durable, not easy to break, rusty or hard, making the tap more flexible to use and the water flow remains even and fine. 2. The 360 degree wide range water tank is cleaned and there is no dead angle. The rotating tap can be bent and fixed according to the target angle without splashing. 3. Two modes: one is the foam mode and the other is the shower mode. By setting two modes, the water flow can be automatically controlled to avoid splashes of water and water waste. 4. The coating surface of the flexible tap sprayer has a mirror effect that is easy to clean, has a higher surface shine and does not fade or scratch. 5. Increase water pressure and prevent water loss. Air and water mix well, the water feels soft, the water is improved and cleaning is more convenient. 6. Ideal choice for basins and taps. Fits most standard faucets, easy to use and install. Information on cleaning nozzles: Due to the different water quality in different places, the service life of the sprinkler water is also different. If limescale accumulates on the sprinkler, you can remove these parts and immerse them in vinegar water for descaling. Installation suggestions: It is recommended in places with high drainage rates, such as kitchen balconies, use a long hose aerator. It is recommended to use a short aerator with low water tank outlet. Package list: 1 long extension sprayer, 1 short extension sprayer, 2 universal plugs. If you have any questions about
360° rotation: the tap aerator adopts a humanised design. Regardless of whether it is a long or short tap, the nozzle can be rotated 360° and tilted 45°, making it easier to wash the sink and remove food residue. At the same time, it can prevent water from splashing out of the sink, and it can save water, which is very suitable for kitchen and bathroom furniture.
Two water outlet modes: the tap aerator has two water outlet modes that can be easily switched: ventilation jet and shower jet. If necessary, you can simply switch by closing it up or pulling it down. Air is mixed with spray water to increase the amount of water and save water.
Installation is very simple: the tap regulator has two types, long and short, which can be selected according to the actual installation requirements. At the same time, it is equipped with a threaded adapter so it is suitable for installation on most taps.
Wide application: suitable for kitchens, sinks, bathrooms, toilets, etc.; it can clean fruit, vegetables and sinks and save water by 50% to 70%. It is an ideal need for daily use to save water and energy and bring comfort to life.
Price: €11.80
(as of Mar 08,2022 19:12:33 UTC - Details)

Description:

Zinc alloy material delivers strength and reliability

Package includes the hot/cold red/blue sign to cover the adjusting screw.

Good replacement for your broken tap lever handle

For use with one-handed bar / prep, bidet, kitchen and toilet taps
Main Color : Silver;Material : Zinc Alloy;Finish : Chrome Plated
Weight: 143g; Hole fits tap size: 10 x 11mm/0.4" x 0.43"(L*W)
Fits tap core depth: 21.5 mm / 0.85 inches; handle overall size: 135 x 50 x 40 mm / 5.32 inches x 2 inches x 1.46 inches (L x Max.Dx H)
Screw mounting hole diameter: 5 mm / 0.2 inches; screw size: 5 x 8 mm / 0.2 x 0.31 inches (D*L)
Price: €11.80
(as of Mar 08,2022 19:12:33 UTC - Details)

From the manufacturer  PATTEX shower + BA D silicone TRA PFDBT  PATTEX shower + BA D silicone TRA PFDBT

Shower and bathroom sanitary silicone

Features and Benefits

Pattex perfect bath sanitary silicone is a neutral cross-linking premium silicone.

This allows you to create a permanently tight transition: From bath or shower tray to tile. From sink, toilet or bidet to wall or floor or even from the shower enclosure or floor to wall. With Pattex shower and bath sanitary silicone without pre-treatment with primer a secure adhesion is also given to acrylic tubs.

Processing temperature: + 5 °C to + 40 °CHautbildung time: approx. 15 minutes curing time: approx. 2mm per day temperature resistance: -50°C to +120°C Permissible total deformation: 25%


PATTEX DUSCHE+BA D SILIKON TRA PFDBT
Price: €11.80
(as of Mar 08,2022 19:12:33 UTC - Details)

With the Santras seal range, you have all common fibre seals from 3/8 inch to 2 inch at hand. The seals are made from Centellen WS 3820. They are gas tight and suitable for solar use up to + 200 °C. In addition, the seals have the following approvals: DIN-DVGW: DIN 3535-6 HTB-VP401 (1bar): DIN 3376-1 DIN 3376-2, fittings for gas meter BAM: for gaseous oxygen up to 90°C and 100 bar KTW: for drinking water up to 60°C according to the KTW recommendations. of BGA, for Seals D2 WrC: for drinking water up to 85 °C (UK BS 6920) TA-air: VDI 2440.
Extreme resistance – The positive properties of aramid fibres, inorganic reinforcements and NBR rubbers combine in the centelles WS 3820. Their very high strength values make them resistant to oils, solvents, alcohols and organic acids.
The best or nothing – with the unique calendar process, the seals are made in Germany by us. The high-quality workmanship pays off. We do not know full cellars, gas leaks or oil loss. All solid and 100% impermeable.
As individual as you – how many ways there are to create a sealing box from the seven flat seals. Thousands Create your own according to your individual needs. Order the assortment box with us and we will do the rest - including lettering.
SANTRAS PROMISE – To make your purchase decision much easier, we take the financial risk completely on us: if you are not completely satisfied, you will receive your money back immediately – without annoying questions and long waiting time up to 2 years after purchase.
Weight
Dimensionsn. a.n. a.n. a.n. a.n. a.n. a.
Additional information